Sign In | Join Free | My lightneasy.org
China Suzhou Ephood Automation Equipment Co., Ltd. logo
Suzhou Ephood Automation Equipment Co., Ltd.
Suzhou Ephood Automation Equipment Co., Ltd. Gas Regulator,Pressure Transmitter,SUFA Water Valve
Verified Supplier

6 Years

Home > Fisher Gas Regulator >

High Flow Rate Fisher Gas Regulator 1098-EGR For Corrosive Environments Oxygen Service

Suzhou Ephood Automation Equipment Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

High Flow Rate Fisher Gas Regulator 1098-EGR For Corrosive Environments Oxygen Service

Brand Name : Fisher

Model Number : 1098-EGR

Place of Origin : Assembled in China

MOQ : 6sets

Price : USD5800-28500Each One Set

Payment Terms : T/T

Supply Ability : 200sets Every Month

Delivery Time : 8-10weeks

Packaging Details : 1set packed in one wooden case.

Name : Fisher Type 1098-EGR Pressure Reducing Regulators

End Connetion : DN 25, 50, 80, 100, 150, 200 x 150, 300 x 150

Inlet Pressure : 400psi

Maximum Pilot Supply Pressure : 600 psig / 41.4 bar

Flow Rate : 185000m³/h

Usage : Reduce tank pressure

Contact Now

Emerson Fisher Type 1098-EGR Pressure Reducing Regulators

High Flow Rate Fisher Gas Regulator 1098-EGR Pressure Reducing Regulator

For Corrosive Environments And Oxygen Service

Fisher Type 1098-EGR pressure gas regulator provide economical and accurate pressure control in a wide variety of applications;

natural gas distribution systems; fuel gas supply to industrial boilers, furnaces, ovens, and mixers; and large commercial / industrial establishments such as shopping centers and schools. They are also used in plant air service and in liquid service.

Table 1. Outlet Pressure Ranges and Spring Selection

Outlet Pressure Range (PSI/BAR) Spring Part Number Spring Color
3 to 15(0,21 to 1,03)
3 to 20(0,21 to 1,38)
5 to 35(0,34 to 2,41)
30 to 60(2,07 to 4,14)
35 to 100(2,41 to 6,90)
80 to 150(5,52 to 10,3)
1D892327022
1D751527022
1D665927022
1D745527142
1E543627142
1P901327142
Red
Silver
Blue
Green
Yellow
Brown
1. All springs can be backed off to 0 psig (0 bar). For the highest capacity and most accurate control, use the lowest-range spring that can be adjusted to the required setpoint.
2. C Cannot be used in anhydrous ammonia (NH3) applications.

Features

Versatility

Body Side Connection

Easy Maintenance

UL Listed

Specifications

Body Size and End Connection Style

End: 1/2-inch NPT
Gauge Outlet: 1/4-inch NPT

Maximum Inlet Pressure
250psi /17.2Bar

Spring Range

5~35psig (0.34~2.41bar)

Pressure Registration
Internal

Temperature Capabilities
-20º to 150ºF / -29º to 66ºC

The Type 64R has an integral low-capacity relief valve. The valve stem seats against a drilled hole in the diaphragm plate.

If the reduced pressure should exceed the set pressure, the diaphragm lifts off the valve stem so that a limited amount of

excess pressure can flow into the spring case and bleed out through a screened vent.

Fisher 64 Series regulator is also available with a handwheel. An optional handwheel is available for panel mounting.

1. Use qualified personnel when installing, operating, and maintaining these regulators. Before installation inspect for damage.

Make sure there is not any foreign material in the regulator and all tubing and piping are clean and unobstructed.

2. If installing the regulator at an outside location, point the spring case vent in the downward direction to protect it from

getting plugged or from collecting moisture, corrosive chemicals, or other foreign materials. Spring case vent orientation

may be changed by rotating the spring case with respect to the regulator body.

3. Install the regulator so that flow is from the IN to OUT connection as marked on the regulator body.

4. To remotely vent the spring case, remove the screen, if present, and connect 1/4-inch NPT piping or tubing to the spring

case connection. The piping or tubing should vent the spring case to a safe location, have as few bends as possible, and

have a screened vent on its exhaust end that is weather resistant and always pointed in the downward direction.

5. Like most regulators, 64 Series regulators have outlet pressure ratings lower than inlet pressure ratings. Although types

with internal relief include limited downstream overpressure protection, all types may require additional relief protection for

some service conditions if the actual inlet pressure can exceed the regulator outlet pressure rating or the pressure ratings

of any downstream equipment. Inspect a regulator periodically and after any overpressure condition.

6. Each regulator is factory-set for the pressure setting specified on the order. If no setting is specified, outlet pressure is

factory-set at the midrange of the control spring.

High Flow Rate Fisher Gas Regulator 1098-EGR For Corrosive Environments Oxygen Service


Product Tags:

High Flow Rate Fisher Gas Regulator

      

Corrosive Environments Fisher Gas Regulator

      

Oxygen Service Fisher Gas Regulator

      
Buy cheap High Flow Rate Fisher Gas Regulator 1098-EGR For Corrosive Environments Oxygen Service product

High Flow Rate Fisher Gas Regulator 1098-EGR For Corrosive Environments Oxygen Service Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Suzhou Ephood Automation Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)